- Non-marking treadGrey TPR with no carbon black to transfer
- 58–66 dBRoughly half the noise of a nylon wheel
- Sealed 6202Dust, flour and wash-down water stay out
- Free sample pairYou cover freight, the casters are on us
- OEM / ODMHub colour, plate, logo, packaging · 1-year warranty
Four sizes, one bolt pattern
A bigger wheel rolls easier and carries more, so specifiers change size late. Because all four share the 115×100 mm plate and the 82×72 mm bolt spacing, that change costs nothing but the wheel.
5 in TPR caster
View swivel · fixed · braked6 in TPR caster
View swivel · fixed · braked8 in TPR caster
View swivel · fixed · brakedEach size comes as swivel, fixed or with a total-lock brake, in a grey or black hub. Not sure which size carries your cart? Run the load calculator.
Non-Marking: What It Really Means
“Non-marking” is not a coating and it is not a promise that nothing can ever happen to a floor. It is what you get when a tread is soft enough not to abrade, resilient enough not to smear, and made from a compound with nothing dark in it to leave behind.
A black mark is pigment, not dirt
Cheap PVC and reclaimed rubber carry carbon black. Under load they shed it onto the floor, and no cleaner takes it out of a porous epoxy. Grey TPR has no carbon black in the compound — there is nothing to transfer.
The haze a week later
Soft PVC bleeds plasticiser. On a fresh epoxy coating that shows up as a dull patch that appears days after the cart was there. TPR is a stabilised thermoplastic rubber: no plasticiser migration onto the coating.
What wipes off, and what bites
Hard treads press grit into the floor and scratch it. A 50 mm tread at 60 Shore A spreads the load and rolls over debris instead of grinding it in. Sand and swarf still have to be swept — no wheel replaces a broom.
Illustration of the drag test, not a photograph. Run it on your own floor before you commit — it takes two minutes and settles the argument faster than any datasheet.
Run the 2-metre test yourself
- Load the cart the way it will actually run, not empty.
- Drag it 2 m straight across a pale tile or an off-cut of your flooring.
- Wipe with a dry cloth. If the mark lifts, it was debris. If it stays, the tread is transferring — and that is the wheel you return.
Noise Levels by Wheel Material
Same cart, same floor, same walking pace — the tread compound decides almost all of it. The ranges below are what we measure on a hard tiled floor with a loaded cart; your slab, your load and the wheel diameter will move the number by roughly ±5 dB.
Why we publish a range, not a number
A caster is a mechanical amplifier: the wheel picks up the impact at the floor joint, the fork transmits it to the cart frame, and the frame rings. Change the load from 50 kg to 300 kg and the same wheel gets 6–10 dB louder. Quote one figure and it is wrong for nine out of ten carts.
Where the noise actually comes from
Three sources, in order: tread hardness hitting the joint, bearing play in the swivel raceway, and an unbalanced load drumming on a thin deck. TPR fixes the first. If your cart still rattles after fitting it, the deck is the problem — add a 6 mm ply or rubber mat and it drops again.
Best Casters for Epoxy Floors
Epoxy is a coating, not a slab. It scuffs, it hazes where plasticiser sits on it, and it chips at the joints. Match the wheel to the coating and the traffic, not to the building.
| Floor | What goes wrong | Wheel to fit | Why |
|---|---|---|---|
| Epoxy / PU coating | Scuffs, plasticiser haze | TPR 125–150 mm | No carbon black, no plasticiser bleed |
| Polished concrete | Dust film, dark streaks | TPR or solid rubber 150 mm | Soft tread lifts grit instead of grinding it |
| Ceramic tile | Joint shock, chipped edges | TPR 150–200 mm | Deep tread absorbs the step at each joint |
| Vinyl / LVT | Indentation at the point load | TPR 100–125 mm, wide tread | 50 mm tread spreads the load over more area |
| Cold store, −20 °C | Tread hardens and flats | Cold-grade TPR — ask | Standard compound stiffens below −10 °C |
| Bare steel / yard | Cuts, fast wear, swarf | PU or cast iron | TPR will not survive hot or sharp debris |
A cart that spends 90 % of its life indoors and 10 % on a loading ramp is an indoor cart: fit TPR and accept that the outdoor leg wears it faster, rather than fitting PU and scuffing the epoxy all day.
TPR vs PU: Which for Your Floor?
Both are non-marking, both are quiet next to nylon, and both come on the same fork. The difference is what each one does when the floor stops being perfect.
| Property | TPR | Polyurethane |
|---|---|---|
| Non-marking | Yes — best on pale floors | Yes, on most coatings |
| Noise on tile | 58–66 dB | 66–74 dB |
| Load per wheel | 180–380 kg | up to 1,200 kg |
| Rolling on rough floor | Higher resistance | Lower resistance |
| Cut and tear | Soft, cuts on swarf | Far tougher |
| Heat | to ~60 °C | to ~90 °C |
| Oil, grease, water | Good | Better |
| Price, same size | Lower | Higher |
Choose TPR when
The cart lives indoors, the floor is coated or tiled, the load is under 380 kg per wheel, and someone will complain about a scuff. Supermarket, retail, lab, food service, hospital corridors.
Choose PU when
The same cart also crosses gravel, swarf or a ramp, the load is over 400 kg per wheel, or the floor is swept concrete. See the polyurethane range for the load-versus-quiet trade-off.
Specifications
Four wheel diameters, one plate, one bearing. Everything below is the drawing value — if your frame needs a different plate, it is cut to order while the wheel and fork stay the same.
| Size | Wheel Ø | Tread | Mount height | Load / wheel | Plate |
|---|---|---|---|---|---|
| 4 in | 100 | 50 | 143 | 180kg | 115×100 |
| 5 in | 125 | 50 | 165 | 240kg | 115×100 |
| 6 in | 150 | 50 | 190 | 310kg | 115×100 |
| 8 in | 200 | 50 | 240 | 380kg | 115×100 |
Ratings are per wheel for a level floor at walking pace. On cracked concrete, ramps or a towed cart, take 20–30 % off. Ask for the drawing if you need to check the plate against a frame.
Six floors, six rigs
Every row below is a floor someone has to look at every morning. The rig column is the layout we ship most often for that job.
FAQ
The six things buyers ask before they order a sample. If yours is not here, send it with the form below and we will answer it in a working day.
Do TPR casters really not mark floors?
Grey TPR does not contain carbon black, so it has nothing dark to transfer onto a pale floor, and it carries no plasticiser that would haze a fresh epoxy coating. What it can still do is pick up grit and press it into a soft floor, or leave a mark if the wheel is dragged sideways while locked. Keep the floor swept and the brake released before moving the cart, and a TPR wheel leaves no mark on tile, epoxy or polished concrete.
What is the difference between TPR and solid rubber?
Solid rubber is denser and slightly quieter, and it takes more load for the same diameter, but it is heavier and costs more. TPR is a thermoplastic rubber: lighter, cheaper, moulded in one shot over the PP core, and it holds its colour. For indoor carts under 380 kg per wheel the two behave much the same on the floor; the choice usually comes down to budget and to whether the cart also runs outdoors.
How loud is a TPR caster compared with nylon?
On a hard tiled floor at walking pace, a loaded TPR caster typically runs 58–66 dB, against 75–84 dB for nylon or PP and 85–95 dB for cast iron. That is roughly a halving of perceived loudness, which is why hospital corridors and night-shift warehouses specify it. Load, floor joints and the cart deck can each add 5 dB or more, so treat the figures as a comparison between materials rather than a guarantee for your cart.
Will TPR casters work on an epoxy floor with forklift traffic?
Not in the same bay. A forklift on a coated floor generates point loads and sharp turns that no 50 mm tread is designed for; the casters will survive, the coating will not. Keep TPR carts on the pedestrian side of the line, and specifiy polyurethane or cast iron for anything sharing a lane with lift trucks.
How much load does a 4 inch TPR caster carry?
180 kg per wheel at walking pace on a level floor, with a 50 mm tread and a sealed 6202 bearing. For a four-wheel cart that is a 720 kg gross weight before derating; apply the usual 0.75 factor for uneven floors or an off-centre load and plan on about 540 kg. If your gross weight is higher, move up a size rather than adding casters.
Can I get a sample, and can the hub be a different colour?
Yes to both. We send a sample pair free — you cover the freight — so you can run the 2-metre drag test on your own floor before ordering. Hub colour, plate size, fork finish, logo and retail packaging are all made to order; the wheel compound and bearing stay standard so the lead time stays at 25–30 days for production quantities.
Tell us the floor and load
Three lines is enough for us to recommend a size and send a sample pair. Drawings and a quotation come back the same working day.
- Sample pair free — you cover freight only
- Drawing in 24 h for custom plates and fork finishes
- 25–30 days production, 1-year warranty on the rig