Fix the wheel size
Ø100 to Ø200 mm. A larger wheel rolls over floor joints, cables and swarf with far less push force; a smaller one keeps the deck low. 6 in is the practical floor for anything above 500 kg gross.
See the size and height table| Brand Name: | Luma |
| Model Number: | / |
| MOQ: | 50 |
| Price: | / |
| Payment Terms: | L/C,wechat,alipay |
| Supply Ability: | 100000 |
Skip to content
Size, load, rig — in that order. Get the first two right and the caster will outlast the cart it is bolted to.
Ø100 to Ø200 mm. A larger wheel rolls over floor joints, cables and swarf with far less push force; a smaller one keeps the deck low. 6 in is the practical floor for anything above 500 kg gross.
See the size and height tableTake gross cart weight, divide by the number of casters, then add 30–50 % for uneven floors and off-centre loads. Our range covers 800 to 1,200 kg per wheel.
Run the load calculationFixed tracks straight, swivel steers, brake parks. Most industrial carts run two fixed and two swivel; add brakes when operators load on a slope or work under the deck.
Compare fixed, swivel and brakeEvery size shares the 140×110 mm top plate, the 84×72 mm bolt pattern and the 7 mm bracket. Only the wheel diameter, mounting height and load rating change.
Prices and stock are quoted per order — sizes, rigs and plate drilling are mixed freely. Photos show the K02 bracket; wheel finish is natural cast polyurethane unless you specify a colour.
![]()
Technical data
Load against mounting height
The trade-off on this series is height against capacity: every step up in wheel diameter buys 100 kg and 20–50 mm of deck height. Read the table before you commit to a cart frame.
| Size | Wheel Ø | Load per wheel | Mounting height | Deck height vs 4 in |
|---|---|---|---|---|
| 4 in | 100mm | 800kg | 145mm | baseline |
| 5 in | 125mm | 900kg | 166mm | +21mm |
| 6 in | 150mm | 1000kg | 192mm | +47mm |
| 8 in | 200mm | 1200kg | 243mm | +98mm |
Load ratings are per caster, for evenly distributed loads on a level industrial floor — derate 20–30 % on cracked concrete or where the cart is towed above walking pace. Catalogue numbers on industrial caster wheels are only comparable when the test method is stated, so ask for the report.
Cast polyurethane rolls quietly on finished floors and resists oil, water and most cleaning chemicals. Match the row closest to your operation.
The six things buyers ask before they place a first order. If yours is not here, send it with your drawing.
Add the empty cart weight to the payload, divide by the number of casters, then add 30–50 % for uneven floors and off-centre loads. A 1,000 kg gross weight on four wheels is 250 kg each; with a 1.5 factor you need 375 kg per wheel, so a 6 in at 1,000 kg leaves a comfortable margin.
If the load sits over one end, rate the two wheels under it for the full share instead of a quarter — that is the mistake behind most flattened treads.
The 4 in K02 is rated 800 kg per wheel, on a 55 mm tread, a 7 mm bracket and a 6303 ball bearing. That is a working rating for a level industrial floor; cut it by 20–30 % on cracked concrete, on ramps, or where the cart is towed faster than walking pace.
A solid cast iron wheel carries the most load and shrugs off heat, but it is loud and it marks finished floors. A cast iron core keeps that rigidity while the polyurethane tread does the rolling: quieter, non-marking, better grip on epoxy, and it damps the shock of floor joints.
Keep solid iron for foundry floors, yards and ovens where nothing else survives.
No — cast polyurethane is non-marking on tile, epoxy and polished concrete, and it resists oil, water and most cleaning chemicals. Two limits: standard PU softens above roughly 90 °C, and sharp metal swarf can cut the tread. For ovens, weld shops or hot castings, specify cast iron or phenolic instead.
The common layout is two swivel at the steering end and two fixed at the back: the cart tracks straight under load and still turns inside an aisle. All-swivel suits tight spaces and automated carts, but it wanders at speed. Add brakes to the swivel pair, or to all four if the cart parks on a slope.
Every plate caster in this series uses the same mounting, so check three numbers against your frame: plate 140×110 mm, bolt spacing 84×72 mm, hole Ø13 mm for M12 bolts. If the pattern is different, send a photo of the mount or a drawing — we cut top plates and adapter plates to your frame in-house, and the wheel, bracket and bearing stay the same.
If the floor or the environment rules out polyurethane, start here.
Tell us the cart, the floor and the load. You get a size recommendation, a sample pair and a quote — usually the same week.
![]()