The first time a buyer sees "10×3" on a quote, they multiply — and get 30 of something. Wrong. The D×W code is the two measurements that decide everything: wheel diameter × tread width. Once you read it fluently, spec sheets stop being a wall of numbers.
10×3 = 10 inches wheel diameter × 3 inches tread width = 250mm × 75mm.
The diameter decides what the wheel can roll over. The width decides how many kilograms it can carry and how much floor it protects. Multiply them and you get nothing useful — they describe different things.
Quick conversion for the common industrial codes:
Code |
Diameter |
Width |
Typical class |
6×3 |
150mm |
75mm |
Extra heavy, 1,300kg |
8×3 |
200mm |
75mm |
Extra heavy, 1,500kg |
10×3 |
250mm |
75mm |
Extra heavy, 2,500kg |
12×3 |
300mm |
75mm |
Extra heavy, 2,500kg + max clearance |
100-4 |
100mm |
50mm |
Heavy duty, 280–500kg |
200-8 |
200mm |
50mm |
Heavy duty, 420–1,200kg |
You'll notice industrial catalogs use both notations — "10×3" (inches) and "250-10" (mm-diameter). They mean the same wheel. When a supplier quotes one and you ask for the other, ask for both diameter and width in mm; that kills 90% of quoting mistakes.
At heavy loads, buyers obsess over diameter and forget width. But capacity lives in the contact patch: our extra-heavy line uses 75mm-wide wheels specifically because 2.5 tonnes on a 50mm tread grooves concrete and fights the operator. Same diameter, more width, more floor, less effort.
Diameter and width are printed everywhere. Bracket thickness usually isn't — you have to ask. The answer separates a real extra-heavy caster from a heavy-duty caster with a big wheel: ours run 10mm plates on the extra-heavy builds, and we print it because it's the number that decides whether the wheel's rating means anything.