Every caster catalog says "heavy duty." Half of them say "extra heavy duty." Almost none of them tell you where the line actually is. After supplying cart builders for 18 years, here's the line we draw — in millimeters.
Open a standard heavy-duty caster and measure the top plate: 7mm is typical. Real extra-heavy builds start at 10mm. That difference decides what happens the first time a loaded cart hits a dock plate at speed:
Our extra-heavy series runs a 10mm plate with a 10mm fork on the nylon builds (190×140mm plate, 146×106mm spacing) and a 10mm plate with an 8mm fork on the orange PU iron-core build (140×110mm plate) — one full grade thicker than the standard heavy line.
The second divider is load per wheel. Standard heavy-duty tops out around 1,200kg per wheel. Extra heavy starts where that ends:
Wheel width is the third tell. Heavy-duty wheels run 50–55mm. Extra-heavy nylon runs 75mm — a wider contact patch that spreads 2.5 tonnes across more floor, so the wheel doesn't groove soft concrete and the push effort stays sane.
Whatever you buy, keep one calculation in your pocket: required wheel rating ≈ gross cart weight ÷ 2 — never ÷ 4, because four wheels never share a load equally on a real floor. A cart that actually weighs 4 tons needs 2,000kg-class wheels, which puts you squarely in this category.