Nobody buys 12-inch casters for fun. They lift the deck 100mm higher than an 8-inch wheel, they cost more, and they look oversized in the catalog photo. So when do they actually pay off? Three situations, in order of how often we see them.
Count what a loaded cart crosses in one trip: expansion joints, dock plates, door thresholds, welded plate edges, outdoor concrete cracks. A 200mm wheel climbs obstacles up to roughly 20mm; a 300mm wheel handles 50mm-class obstacles — and does it without the wheel-to-fork interference that smaller diameters suffer. If your route crosses two or more of these per trip, the 12-inch wheel pays for itself in the first month of not stalling.
Outdoor concrete is not indoor concrete. Frost heave, settled slabs, ramp transitions — outdoor terrain is a obstacle course you don't control. Large wheels are the only suspension your cart will ever have. Shipyards, rental yards and airport freight crews standardize on big wheels for exactly this reason.
Rolling resistance drops as diameter rises: a bigger wheel "climbs" less out of every floor imperfection. At 2 tonnes, a 300mm wheel versus a 200mm wheel is the difference between a two-person push and a one-person push over 100 meters. Our 12×3" nylon build keeps the full 2,500kg (5,511 lb) rating while adding this effect — the diameter buys you ergonomics, not just clearance.
Smooth indoor floors, low decks, and carts that never leave the building: 8 inch carries the same load (our 10×3" and 12×3" are both rated 2,500kg) at lower cost and lower deck height. Don't buy clearance you'll never use.
Big wheels generate bigger side loads in turns. Pair them with structure: our 12×3" build runs the same 10mm plate and fork as the 10-inch, on a 6205 bearing, 190×140mm plate. Wheel diameter and bracket thickness have to scale together — that's what keeps a 2.5-tonne turn from becoming a bent fork.