Spec sheets don't sell casters; applications do. Here are the four extra-heavy applications we supply most, with the exact wheel logic behind each build — so you can match your own cart to the right one.
A die cart's worst moment is the initial push: full static load, cold start, slightly uneven floor. The wheel that survives this is hard, wide and calm — which is nylon, not PU. Our customers standardize on the 10×3" (250×75mm) nylon wheel rated 2,500kg per wheel, on the 10mm plate/fork structure with a 6205 bearing. Two fixed + two swivel keeps a 3-ton die predictable through the shop. The white-fork version is the indoor workhorse; the blue-fork version adds 12" wheels when the route crosses pit edges.
Tow trains multiply side loads every time the train turns, and a bonded wheel core that can't take shear will delaminate within months. That's why tow-line carts run the orange PU build with a cast iron core: the rigid core resists turning shear, the 55mm PU tread absorbs dock impacts, and the 10mm plate / 8mm fork structure handles the combined vertical-plus-side load. Ratings from 800 to 1,200kg per wheel across 4"–8".
A loaded container dolly can gross 3.5–4 tons. The sizing math (gross ÷ 2) lands you at 1,750–2,000kg per wheel, which is exactly the 10×3" nylon territory — 2,500kg per wheel covers it with margin. For indoor yards on smooth concrete, nylon wins. For mixed outdoor yards, the same dolly swaps to the 12×3" blue-fork build for the 50mm-class clearance over dock plates and yard cracks.
Salt air kills plated steel slowly and impact kills it fast; constant outdoor use over uneven steel plates means the 12×3" nylon build is the only sensible spec: 300mm clearance, 2,500kg rating, 75mm tread that doesn't groove wet concrete. We tell dock customers one thing: don't step down from 12 inch to save money — every stall on a steel plate edge costs more than the wheels ever did.
Every application above runs the same three-part logic: hardness matched to the floor, capacity sized by gross ÷ 2, and structure (10mm-class plate) matched to the load. Get those three right and the casters stop being a maintenance line item.